Verine Quasar Plus User Manual download pdf (Page 61)

To clean the glass panel, please remove it from the product as described in pages

10-11. Use a clean damp cloth and ceramic glass cleaner to remove any stains or

deposits frm the glass panel. Do not using scouring pads as this may scratch the

surface finish of the glass panel.

PLEASE NOTE

:- The glass will require cleaning periodically. Condensation

produced by the products of combustion will create marks on the inside face of the

glass panel.

6.7 REMOVAL AND RE-FITTING THE TRIMS / FRETS

/ FASCIA’S

Please refer to pages 35 of the Installation section of this manual.

6.8 USER REPLACEABLE PARTS

The only user replaceable parts on this fire are the fuelbed components and

coals / pebbles which may be replaced as described in section 6.3 / 6.4. In order

to replace the fuel-bed components, the glass panel of the appliance will need to

be removed, please refer to pages 11 & 12 of this book for details on how to

remove the glass panel.

Replacement of any other parts must be carried out by a competent person such

as a registered gas installer. The part numbers of the user replaceable parts are

as follows, these are available from BFM Europe Ltd. who may be

contacted at the number on the rear cover of this book.

Complete pebble / ceramic set B-110000

Pebble fuelbed base B-109980

Pebble fuelbed front rail B-126520

Replacement pebble set B-110020

Complete coal / ceramic set B-121620

Coal fuelbed base B-109980

Coal fuelbed front rail B-108050

Replacement coal set B-121630

1 2 ... 56 57 58 59 60 61 62

No comments

Verine Quasar Plus User Manual Page 61